Flexible Shafts

SLH handpieces, due to their design, allow the largest possible flexible shaft to be used, as the handpiece body is the same size as the outer cover.


SLH handpieces are suitable for tubes from 20mm to 75mm I/D. Used with 9mm, 11mm, 13mm, 15mm, or 17.5mm inner cores.

BBH 
handpieces are suitable for curved or straight tubes from 32mm up to 150mm I/D and are used with 13mm, 15mm or 17.5mm inner cores.

HBH handpieces are for heavy duty descaling of straight tubes from 47mm up to200mm I/D. Used with 15mm, 17.5mm or 20mm inner cores.

Flexible shafts illustrated above are available in standard lengths of 20ft, 23ft, 32ft, 45ft & 60ft and are all fitted with shear pin attachments.

Flexible shafts for workshop use can be fitted with either a heavy duty rubber cover or metallic cover to suit customers specific requirements.
Standard lengths are 6, 8, 10 or 12ft long, but lengths up to 60ft can be supplied to special order.
All MWU handpieces have a swivel unit fitted to enable easy manipulation by the operator, the threaded spindle is used for the fitment of either a cone arbor to suit polishing mops up to 10″ dia, spindle and sideplates to suit 6″ dia grinding wheels or a collet chuck adaptor to suit shanked tools 1/4″ dia, 6mm dia or 8mm dia.
A full range of standard wire brushes up to 12″ dia is manufactured together with the specialised Rubberised Brushes as illustrated on other pages.

PLEASE ALSO REFER TO “WORKSHOP EQUIPMENT” PAGE

FOR ALL OUR UK CUSTOMERS WE OPERATE A 24 HOUR FLEXIBLE SHAFT REPAIR SERVICE

E Mail: sales@scaleaway-tools.co.uk